Hiwin HG Series Linear Rails

The main function of a linear guide is to guide and support. It will carry a moving part, namely the load. The load moves in a certain direction. The repetition of this movement is relatively high, over and over again. During the motion, there will be significant conflicts between the loads on the guide rails, but after the planning and application of the sphere, the conflicts between the two will be greatly reduced.

During the production process, the linear guide slider is mainly composed of multiple components. Its product will consist of components such as sliders, steel balls, retainers, end caps, dust covers, and oil nozzles. There are still many parts.

Working principle of linear guide slider

Linear guide rail can be understood as a rolling guide rail, which allows the load channel to move linearly along the guide rail with high precision through infinite rolling cycles between the slider and the guide rail, reducing the conflict coefficient to one fiftieth of traditional sliding guide rails and achieving high positioning accuracy easily. The unit planning between the slider and the guide rail enables the linear guide rail to simultaneously accept loads from various directions such as up, down, left, and right. The reflux system and simplified structural planning enable the linear guide to have flatter and lower noise motion.

The effect of linear guide slider

To some extent, linear guides can be effectively understood as rolling guides. During the production process, the steel ball is mainly composed of an infinite rolling cycle between the slider and the guide rail, allowing the load channel to move linearly along the guide rail with high precision and reducing the conflict coefficient to one fiftieth of that of traditional sliding guides, achieving high positioning accuracy in a simple manner.

The slider of the linear guide rail is planned together with the unit between the guide rail, so that the linear guide rail can accept loads in directions such as up, down, left, and right. Its reflux system and simplified structure can make the planned linear guide rail have smoother and lower noise motion.

Linear guide is a type of rolling guide. When in use, the steel ball mainly undergoes infinite rolling cycles between the slider and the guide rail, allowing the load channel to easily perform high-precision linear motion along the guide rail. The conflict coefficient can be reduced to 1/50 of traditional sliding guides, making it easy to achieve μ m positioning accuracy.

The end unit planning between the slider and the guide rail of the linear guide rail enables the linear guide rail to accept loads in various directions such as up, down, left, and right. The reflux system and simplified structural planning enable linear guides to have smoother and lower noise motion capabilities.

HG Series,Linear Rails