1. High homework accuracy

The motion of the linear guide is completed by rolling, not only reducing the conflict coefficient to 1/50 of the sliding guide, but also reducing the distance of dynamic and static conflict resistance, achieving smooth motion, reducing impact and oscillation, and avoiding creeping phenomenon. Therefore, it can achieve UM level feed and positioning accuracy, which is beneficial for improving the response speed and sensitivity of the numerical control coefficient.

2. Significant decrease in driving rate

Because the conflict force during linear guide motion is very small, only a small amount of power is needed to make the machine move, significantly reducing the power loss of the machine. Moreover, the heat generated by the conflict is minimal, making it suitable for high-speed, frequent starting and reversing moving parts.

3. Smooth structure simplified

The linear guide rail is equipped with an oil cup on the slider, which can directly inject oil and grease, or connect to the oil supply pipe to actively supply oil to the machine smoothly, reducing its wear and enabling the machine to maintain precision operation for a long time.

4. Dust prevention and sealing are essential for strong performance

The straight-line guide rail has outstanding dust-proof function. The two ends of the slider are equipped with sealed end caps, and the bottom can be equipped with sealed film. The fixing screw holes of the sliding rail are equipped with dust-proof screw hole caps to avoid dust accumulation and ensure the longevity and functionality of the product.

5. Convenient device and simple exchange

Due to the use of sophisticated processing techniques, the straightness of the slide rail is high, and there are fewer errors in the screw holes of the device in the slide rail. The device is convenient, and the linear guide rail has interchangeability, allowing for the replacement of sliders or even linear guides, enabling the machine to achieve high precision from scratch.

6. Carrying capacity is large. stiffness strength

The linear guide adopts Gothic four point contact planning and a reasonable ratio of circular arc grooves, which not only reduces the contact stress, but also greatly improves the load capacity and stiffness compared to V-shaped flat ball point contact. Because the copper ball is subjected to symmetrical four point manipulation, it can bear loads from all directions together without any deviation, resulting in stronger rigidity and higher accuracy.