Hiwin HG Series Linear Rails

Micro linear guides are commonly referred to as linear guides. These mechanical components are classified as precision parts, so any slight carelessness during use can cause damage to the parts. Therefore, in production operations, it is important to adopt a cautious production attitude to avoid damage to the linear guides caused by incorrect use. Next, let's learn about the precautions to be taken when using linear guides.

1. Application requirements: Linear guides also have relatively high application requirements regarding the application environment. In our production environment, there is not only visible dust, but also some invisible dust. Once these dust fall into the linear guide, there will be some adverse application reactions, such as increasing the wear of the guide rail, increasing the mechanical vibration force, and improving the noise level, which will then lead to other application problems.

2. To avoid rusting: To avoid such a usage situation, the first thing to do is to avoid directly using both hands to pick up such accessories. The correct approach is to clean your hands before use, remove stains and sweat, and then apply some mineral oil on the straight guide rail before performing other operations. Especially in humid summer, it is necessary to do a good job of moisture-proof treatment.

3. Equipment matters: Regarding the equipment of linear guide rails, it is also necessary to be careful and meticulous. During the equipment, it is not allowed to use strong stamping or heavy objects to strike the guide rails. Once the equipment is not suitable, technical actions should be taken to carry out the equipment.

 HG Series,Linear Rails