Hiwin HG Series Linear Rails

The micro silver linear guide is composed of guide rails, sliders, rolling elements, reverberators, and retainers. It can replace direct sliding contact with steel balls rolling on the guide rails and sliders, and the rolling elements can circulate in the slider and raceway with the help of reverberators. It has the advantages of low dynamic and static friction coefficient, simple structure, strong precision continuity, and high positioning accuracy. Linear guide rail, also known as linear slide rail, rolling guide rail, precision rolling linear guide rail pair, etc., is mainly used for high-precision control of the parallelism of worktable walking in linear cyclic motion. The rated load of linear guide rail is higher than that of bearings, and it can also bear a certain torque, achieving high-precision cyclic motion in high load environments. When calibrating the linear guide device, it is necessary to first distinguish the extension of the guide rail pair. When using the contact guide rail, the upper silver guide rail adopts the same set of guide rails with the same English capital letters, and continues the Arabic numerals to indicate the connection sequence. The docking ends are connected and combined by the same Arabic numerals to ensure the accuracy of the linear guide rail. Firstly, we need to clarify the identification of the extended guide rail pair: when using the extended guide rail, the upper silver adopts the same set of guide rail pairs with the same English capital letters, continuing the Arabic numerals to indicate the connection order. The docking ends are connected and combined by the same Arabic numerals to ensure the accuracy of the HIWN straight line guide rail. To avoid the formation of high precision when the bed runs to the joint due to errors in the guide rail device. Request to leave a gap of 0.03-0.05mm (with some using a feeler gauge) at the joint position of the guide rail, in order to avoid axial elongation caused by thermal shrinkage of the guide rail. Features: 1. Small size, lightweight, suitable for use with small devices; 2. The slide rail and slider are made of stainless steel, including steel balls and retainers, which have anti rust characteristics; 3. Adopting the Goethe style four point contact design, it can withstand various loads, has strong rigidity, and high accuracy. 4. There is a steel ball retainer design that allows for interchangeability within this precision. In addition to the above features, the MGW series has widened the design of the slide rail, greatly improving the torque load capacity, and can be used in single axis applications: semiconductor manufacturing equipment, printed circuit board IC assembly equipment, medical equipment, robotic arms, precision measuring instruments, office automation equipment, and other small linear sliding equipment.

HG Series,Linear Rails